Selco Balers Baxley Ga



Selco balers baxley ga weather

  • Selco 2-Ram is a Trademark by Selco Products Company, the address on file for this trademark is P.O. Box 406 Jekyll Road, Baxley, GA 31513.
  • The auction is split into two simultaneous rings. One ring which is located outdoors, selling primarily vehicles, construction equipment, and miscellaneous items. And the second ring starting indoors followed by outdoor items, these lots consist of a.

Photos, directions, phone numbers and more for Selco Baler locations in Baxley, GA. Georgia Baler and Compactor can supply your company with parts for all brands of equipment. We have a large inventory of parts for balers, compactors, and roll-off May 26, 2011 This is a demonstration of a Selco HL-60SS horizontal baler prior to reconditioning. Selco Balers was founded in 2010. Selco Balers specializes in Conveyors And Conveying Equipment.


Back to CRX Waste and Recycling Equipment (Used) Index | Exchange Index
Policies & Procedures | Disclaimer | How to Add A Listing | How to Reply to Listings

Baxley

INSTRUCTIONS:

  • To respond directly to a specific listing, enter your email where specified and click on the 'GO' button for that listing.
  • To add a Buy / Sell / Trade listing to this category of the Exchange, choose Add: Exchange Listings.
Parts

Waste and Recycling Equipment (Used)

MORE LISTINGS :Wanted (6) | Available (145)WANTED & AVAILABLE
Listings: (1 - 20) of 151

AVAILABLE : LA1292535
Shipping Pt. / Location: USA, ARIZONA

Quantity Units Frequency
1eachOngoing
PriceFundsPer Unit
15,000.00USDeach
Used Balers - Excel EX 77 Baler & Conveyor. Bales Pet, UBCS, Metals, OCC, and More. Large Feed.

AVAILABLE : LA1292310
Shipping Pt. / Location: USA,

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
165,000.00 USDeach
Used Balers - IPS 1388 with Hustler 84' Conveyor . 13″ main cylinder 9″ eject cylinder 200HP – Two (2) 100 HP motors Bale Release / Separation Door Pre-compression lid 72″ x 96″ Hopper Opening 30 x 64 x 45 Bale Size Pinnacle II Wire Tier Hustler 84″ Wide Below Grade Infeed Conveyor Chain Rubber Cleated Belt Touch Screen Control Unit Sold in As-Is Condition OCC 24tons/hour, PET 10tons/hour, UBC 18 tons/hour, Solid Waste 46 tons/hour Hustler 84' Wide Chain Rubber Cleated belt infeed conveyor

AVAILABLE : LA1292226
Shipping Pt. / Location: USA, Dell vostro 1310 driver download.

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
6,000USDeach
Used Balers - #2055 Marathon V-7230HD. Electrical: 3 Phase 208/230/460 Volt Model: V-7230HD-021 S/N: 144343 Motor: 10 hp System Pressure: 2,000 psi. Max. Platen Force: 62,200 lbs. Cylinder Bore, Rod, and Stroke: 6' x 3.5' x 48' Cylinder: 8” Bale Size: 72'W x 30'D x 48'H Bale Door: 6' x 3' Baler Weight: 5,400 lbs. Bale Volume: 60 cu.ft.

AVAILABLE : LA1292224
Shipping Pt. / Location: USA, DULLES VA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
75,000.00USDeach
Used Balers - # 2011 Marathon Baler. Model: TR-10-50 with conveyor Serial Number: 101990 Power: 50 HP 10” Main Ram 8” Eject Cylinder 40” x 80” Feed Opening High efficiency, oversized air-to-oil cooler, left or right ejection Applications Cans / Bottles; Fibrous Materials / Textiles; Metals; Paper / Corrugated; Plastics; Recycling; Scrap / Solid Waste; Wood Chips / Biomass Specifications Maximum Operating Force: 118 tons (107 metric tons) Cycle Time: 17 seconds Bale / Compact Weight: 1500 lbs. (680 kg) Bale / Chamber Size: L 31' x W 45' x H 64' Technology: Hydraulic Platen Force: 235,600 lbs. Dual Shear Blades 235,600 Total Ram Force

AVAILABLE : LA1292223
Shipping Pt. / Location: USA, BAXLEY GA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
70,000.00USDeach
Used Balers - Horizontal Baler HSO-107A20. Mfg: 2008 20 HP Motor 7” Main Cylinder 30” x 36” x Variable Bale Size 28” x 30” Charge Box Opening Excellent/Like new condition LESS THAN 500 hrs. on machine Price: Loaded on a truck

AVAILABLE : LA1292222
Shipping Pt. / Location: ITALY,

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
299,000.00USDeach
Used Shears - #1893 Colmar SB6200-800 Shear baler Diesel. Pre-Owned Colmar SB6200-800 Shear Baler Diesel s/n 8319 with approx. 11,000 working hours. Factory-refurbished with 6 months parts warranty

Selco Balers Baxley Ga Zip

AVAILABLE : LA1292220
Shipping Pt. / Location: USA, NV

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
23,900USDeach
Used Waste & Recycling Equipment - 2014 JV CX-07 / 7 Yard Stationary Compactor. JV Cram-A-Lot 7 Yard Compactor Model: CX-07 30 HP Power Unit Mfg: 2014 Twin 6” Cylinders Clear Top Opening: 68” x 93”

AVAILABLE : LA1292219
Shipping Pt. / Location: USA,

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
105,000.00USDeach
Used Shredders, Granulators & Hammermills - Vecoplan RG62/150 SPK FF Film & Fiber Single Shaft Shredder. Film and Fiber Rotor – 15″ Diameter – 150 HP motor 480 volts with a hydraulic pump to run the hydraulic ram, and Flinders Gear Box. Special Option of Hard Face Rotor -(Rotor has cooled – but the company never needed to use it for the material they were doing) low hours! 74 Cutters with 48 Nip Cutters – Shredder on 16″ high base, which can be taken off if desired. just bolts on. Complete with Control Panel, with extra holes for accessories if needed. Outboard bearings. Dimensions: 180″ Long 125″ wide and 78″ High without hopper – hopper is 40” High and top of the hopper is 96″ wide x 112″ long. Ram Opening is 10″ deep x 63″ wide and moves along 63″ long rotor. T He is a Hard Face V-Groove Rotor and in good shape – no wear!!! Comes with 4 screens -1 2″ – 1 1/2″ – 3/4″ – comes with spare cutters – rails and wipers were changed. Comes with a 20-foot-long out feed conveyor – 5 feet high – and 23″ belt that flares out to 32″ wide, and 64″ wide at the end where the drive is and is inclined as the shredder was on a base. Manuals.

AVAILABLE : LA1292218
Shipping Pt. / Location: USA, ROCKY MOUNTAIN NORTH CAROLINA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
175,000USDeach
Used Shears - Diesel Colmar 6200-800 shear baler. 2008 •Diesel Engine / New CAT Tier 3 Replacement. 1,100 hours on this engine. •Panel upgrade. Remote technical support, operation with an iPad, and many other valuable features included with this upgrade. •In line filtration system. •Techs to set up, train, monitor it and provide ongoing support remotely.

AVAILABLE : LA1292216
Shipping Pt. / Location: USA, PA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
34,500.00USDeach
Used Balers - #2048 Marathon Gemini Horizontal Baler. •Model 3560 •Full Eject, closed-door style baler •Manufactured by Marathon/Gemini •20HP Motor •Two - 6' Bore Cylinders •58' x 35' Feed Opening •60' x 30' x 48' Bale Size

AVAILABLE : LA1292080
Shipping Pt. / Location: USA, MIDWEST

Quantity Units Frequency
1eachOngoing
PriceFundsPer Unit
13,900.00USDeach
Used Balers - CP Mfg CD 3000 Can Densifier. CP CD 3000 Can Densifier, With Conveyor. 3000 Lbs per Hour.

AVAILABLE : LA1291908
Shipping Pt. / Location: USA, PHOENIX ARIZONA

Quantity Units Frequency
1eachOngoing
PriceFundsPer Unit
15,000.00USDeach
Used Balers - Excel EX Baler & Conveyor. Excel Horizontal Baler, Bales UBCs, Pet, Metals, Occ. With Conveyor.

AVAILABLE : LA1291805
Beach head 2000 download full version. Shipping Pt. / Location: USA,

Download fonts for google docs

Quantity Units Frequency
1eachOngoing
PriceFundsPer Unit
65,000.00USDeach
Used Shears - Mosley 1000 Ton Shear/ Electric. 1000 Ton Shear, Squeeze Box, High Production.

AVAILABLE : LA1291556
Shipping Pt. / Location: USA, GA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
149,000USDeach
Used Balers - Selco 2 Ram Baler . 200 HP Main Motor • 12” Main Cylinder (Repacked) • 9” Bore Ejector • 8” Bore Door • Feed Opening: 40-50” wide x 72-80” long • Cycle Time: 12-18 seconds • Bale Size: 45 x 30 x 60-64 • 208/230/460 Volt, 3 Phase, 60 HZ • Control Platform Included • Baler Table with Unit Rebuilt Items: • Hydraulic Power Unit • Basic Components • New Motors • All New Hoses • Refurbished Pumps & Valves • New Automated Control Panel • New PLC & Panelview with controls • New All Color Touch Screen • New Program • All-New Prox Switches & Laser Positioning Sensors • New Air & Oil Filters

AVAILABLE : LA1291462
Shipping Pt. / Location: USA, CA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
185,000USDeach
Used Shredders, Granulators & Hammermills - #2046 Hammel VB 750D. Cat 3406 425HP Oversized cooler Oil tank. 150-gallon fuel tank Year: 2011 XLNT Condition Re-hosed Re-wired Operate Manually Auto Reverse Tilt Hopper Water Sprinkling (Needs Work) Skid Mounted with Fork Pockets Operate manually Breaker bar Shaft: Standard 5x5x5 Shaft Configuration. (Shafts reconditioned) New Combs Skid Mounted / with Fork Pockets Move around the yard with an excavator or pick up with a large forklift

AVAILABLE : LA1291461
Shipping Pt. / Location: USA, PARIS TN

Quantity Units Frequency
11eachOne Time Only
PriceFundsPer Unit
5,000USDeach
Used Balers - Max-Pak Vertical Balers. MP60HD-10HP Motor: 10hp Volts: 208/230/460v Phase: 3 Bales a variety of materials, but is particularly suited for cardboard (OCC) and newspaper (ONP) Bale size 30' x 48' x 60″ Bale weights up to 1300 lbs.5k for each one of these and 28 in stock.

AVAILABLE : LA1291367
Shipping Pt. / Location: USA, PA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
95,000.00 USDeach
Used Balers - #1863 Excel mfg. 2r9 baler. • Year: 1998 • Motor: 50 HP • Main Cylinder: 9' x 106' stroke • Eject Cylinder: 9' • Feed Opening: 40' W x 65' L • Bale Size: 60' L x 45' W x 30' H • In very good working condition • Approx. 12,000 hours as of November 2020 (the equivalent of a 6-year-old machine) • Has been used as a backup machine processing paper products • Conveyor can be included for additional price Horizontal two ram, auto tie

AVAILABLE : LA1291242
Shipping Pt. / Location: USA, ARIZONA

Quantity Units Frequency
1eachOngoing
PriceFundsPer Unit
53,000.00USDeach
Used Balers - EZ Portable Log Baler. Portable Log Baler, With Crane & Grapple.

AVAILABLE : LA1290936
Shipping Pt. / Location: USA, GA

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
185,000.00USDeach
Used Balers - #2083 2 Ram Baler . Selco 2R12-200 Two Ram Baler (Rebuilt) • 200 HP Main Motor • 12” Main Cylinder (Repacked) • 9” Bore Ejector • 8” Bore Door • Feed Opening: 40-50” wide x 72-80” long • Cycle Time: 12-18 seconds • Bale Size: 45 x 30 x 60-64 • 208/230/460 Volt, 3 Phase, 60 HZ • Control Platform Included • Baler Table with Unit Rebuilt Items: • Hydraulic Power Unit • Basic Components • New Motors • All New Hoses • Refurbished Pumps & Valves • New Automated Control Panel • New PLC & Panelview with controls • New All Color Touch Screen • New Program • All-New Prox Switches & Laser Positioning Sensors • New Air & Oil Filters
Selco baler manual

AVAILABLE : LA1290847
Shipping Pt. / Location: USA, NEW YORK

Quantity Units Frequency
1eachOne Time Only
PriceFundsPer Unit
220,000.00 USDeach
Used Balers - Al-Jon 580 LOGGER BALER. Engine and machine:7500 hours. Very good condition Machine is equipped with a reliable Cummins 6-Cylinder Turbo Diesel Engine that starts and runs well.

Real Time Lead Referral | Add Exchange Listings

Selco Baler Company

Selco

Selco Balers Baxley Ga Homes For Sale

View Additional Listings: 12345678